FTP под линух, Мандрива 2007 |
Здравствуйте, гость ( Вход | Регистрация )
FTP под линух, Мандрива 2007 |
Nov 14 2007, 00:18
Сообщение
#1
|
|
Настоящий ADSL'щик Группа: Posters Сообщений: 477 Регистрация: 11.6.2007 Из: НЧК Пользователь №: 7,056 |
Как создать ФТП под мандривой 2007? Желательно в подробностях!!
-------------------- ..и осталась в их мозгах только сила и тоска..
Norco Man |
|
|
Nov 14 2007, 19:03
Сообщение
#2
|
|
Мега постер Группа: Posters Сообщений: 1,068 Регистрация: 6.9.2006 Из: Чебоксары Пользователь №: 1,596 |
Поднимал и pureftpd и proftp проблем вроде небыло. Ну и SIMM правильно заметил - полистал бы сначала всяких how-to (внешний трафик) и пр. пр., без обид. Уж если нерешаемые проблемы (что весьма врятли ), тогда постите сюды. Ну вот навскидку по pure-ftpd:
Цитата Ok, this is my first howto on this forums. I am trying to explain the installing as easy at is possible. My howto contains pure-pw. Ok, First you need to download the latest version of the ftpd server. 1) wget ftp://ftp.pureftpd.org/pub/pure-ftpd...-1.0.20.tar.gz Now we need to ungzip it and cd to the dir. 2) tar zxvf pure-ftpd-1.0.20.tar.gz 3) cd pure-ftpd-1.0.20 Now we're going to configure it. 4) ./configure --with-puredb --with-ftpwho Now we need to compile it. 5) make Now we need to check, if compile was successfull. 6) make check Now we need to install it. 7) make install Now we need to create two database files, so just pickup some favourite editor you like and create those files: /etc/pureftpd.pdb /etc/pureftpd.passwd Now, we need to create the database. 8) pure-pw mkdb If it's a unknown command, you should try: /usr/local/bin/pure-pw Now you can start it. /usr/local/sbin/pure-ftpd -A -B -j -lpuredb:/etc/pureftpd.pdb & if you need to listen it to specified ip, then start it like this: /usr/local/sbin/pure-ftpd -S ip,21 -A -B -j -lpuredb:/etc/pureftpd.pdb & You can add virtual users like this: pure-pw useradd user -u nobody -d /kataloog -m The -u nobody part depends who is the owner of the dir. More information on http://www.pureftpd.org/README.Virtual-Users Второе - с гуями: Цитата These are all steps to follow in order to have a nice ftp server with an easy gui. 1) install attached pureadmin deb file 2) Comment the line in /etc/inetd.conf containing 'ftp' 3) Open /etc/default/pure-ftpd-common and change STANDALONE_OR_INETD=inetd to STANDALONE_OR_INETD=standalone 4) run 'groupadd ftpgroup' and 'useradd -g ftpgroup -d /dev/null -s /etc ftpuser' 5) create ftpuser directory 'sudo mkdir /home/ftpusers' 6) create joe user directory 'sudo mkdir /home/ftpusers/joe' (you can create a directory for each ftp user) 7) run 'sudo pure-pw useradd joe -u ftpuser -d /home/ftpusers/joe' (a) 8 ) run 'sudo pure-pw mkdb' 9) run 'sudo ln -s /etc/pure-ftpd/pureftpd.passwd /etc/pureftpd.passwd' 10) run 'sudo ln -s /etc/pure-ftpd/pureftpd.pdb /etc/pureftpd.pdb' 11) run 'sudo ln -s /etc/pure-ftpd/conf/PureDB /etc/pure-ftpd/auth/PureDB' 12) Create file /etc/pure-ftpd/conf/UnixAuthentication containing only the string 'no' without quotes. © 13) Modify permissions of /home/ftpusers directory ( and of any subdirectories. Owner must be ftpuser while Group must be ftpgroup 14) run sudo pureadmin. 15) stop firestarter if installed 16) through "menu editor" modify pureadmin entry command (under 'system tools') from 'pureadmin' to 'gksudo pureadmin' NOTES (a) joe will be your test user. You can change user joe and/or add other users through pureadmin ( Easy way to change permissions: run 'sudo nautilus', go to /home, change owner with ftpuser and group with ftpgroup. Tick special flags 'set user ID' and 'set group ID'. [not sure if this ticks are necessary] © run 'sudo echo no > cat >/etc/pure-ftpd/conf/UnixAuthentication' Be aware that pureadmin must be run as root. Думаю проблем быть недолжно |
|
|
Текстовая версия | Сейчас: 12th May 2024 - 03:45 |